1,830.00€ 1,630.00€
Available
The FORMINX high-power electric bicycle represents an amazing innovation in the electric bicycle industry.
It has 50% more torque than ordinary electric bikes and this gives you the ability to comfortably climb uphill with a slope of up to 15%, while most electric bikes can climb uphill with a slope of up to 10%.
Electric motor 250Watt, YADEA FUSION
The advanced technology of FORMINX gives you the advantage to move easily in any road conditions, whether on asphalt, dirt road or on
very steep uphills, where other electric bicycles are unable to move.
The amazing performance of FORMINX is achieved with the advanced technology of an electric motor, placed in the center of the frame, in combination with the new patented Drive Transmission system in the Disc Arm (MKD system).
Although the FORMINX has a lot of power, it consumes minimal energy from the lithium battery (Li-ion) and this ensures a long range of up to 50 kilometers.
With the very easy-to-use, illuminated electronic control panel, located in the middle of the steering wheel, you can control and be informed about all the functions of the bike. It has the following functions and indications:
ON / OFF switch. In the ON position the electrical circuit of the bicycle is open and you have at your disposal the electric assistance. In the OFF position, the power assist is switched off.
Selector (+) and selector (-) for fluctuation between the 5 assist scales: 1-very low, 2-low, 3-medium, 4-possible.
Power level indicator on the battery with 4 bars
Indication of the instantaneous speed in km / h.
Indication of the average speed in km / h.
Indication of the daily distance traveled in km.
Indication of the duration of each route.
Indication of the total distance traveled in km since the bicycle was put into operation.
Time display
Most electric bikes have the electric motor mounted on the front or rear wheel axle and this affects the weight balance and flexibility of the bike.
In contrast to FORMINX, the electric motor and the gearbox with the MKD system are low and in the middle of the frame so we have better weight distribution, lower center of gravity and better stability and flexibility, similar to that of a classic bike and this is especially important at high speeds.
Due to the position of the electric motor in the center of the frame there are no cables connected to the front or rear wheel, and so the change – removal of both wheels, in case of tire or any repair, is easy and fast with the release lever that has each wheel .
But on most electric bikes that have the electric motor on the front or rear wheel, removing the wheel that contains the electric motor is usually complicated and time consuming due to the motor cable.
The FORMINX electric motor is automatically activated via an electromagnetic sensor as soon as you start pedaling and switches off as soon as you stop cycling.
This system (PAS, Pedal Assistant System) allows you to save energy and ensure extra autonomy, because it has 4 assist scales: 1-very low, 2-low, 3-medium, 4-strong, to choose from, depending on the level of assistance you wish to be provided by the electric motor, which detects the rider's driving behavior through the sensors of speed, torque and speed and always provides the appropriate assistance with a custom power supply and offers the rider a comfortable and safe use. Cycling.
The electric motor of FORMINX is almost silent and together with the MKD system. they do not need any "maintenance free" maintenance.
You have amazing savings!
Consumes (1 Kilowatt-1KWh) at 100 kilometers!
Lithium-ion Battery (Li-ion), 36V / 7.8Ah, from LG with a long life, usually more than 3 years.
The battery is integrated in the frame, has a lock, comes out easily and charges at home, in the office, etc. or while on the bike.
Available in black and silver.
Model CR5 RKS (FORMINX)
Motor: YADEA Fusion MID Drive Motor Medium friction 36V 250W
Battery: LG 36V 7.8H Cell
Maximum speed 25km / h
Distance: 45-50km
Charging time: 2-4 hours
Front / Rear distributor: 36Hx14Gx100W / 135W
Wheel: Double alloy CNC
Crankshaft: Lasco 40T x 170L AL6061
Front / Rear Brake: Tektro V / Tektro V
Front / Rear tire: Kenda 700C x 40C
W750S LCD liquid crystal display
Saddle Velo VL6269
Frame AL6061 700C "x 410mm
Free: DNP11-28T 7SP
Steering wheel: Ø22.2 x 580W Ø24.5 Alloy
Frame: Alloy AL6061 Ø25.4 "x 180L
Shimano gear levers Shimano SL-R35R
Shimano TZ21 14-28T 7SP speeds
Front / Rear light: 12V LED / 12V LED
Derailer: Shimano Tourney TY300T 7 speeds
Net weight: 23kg
Maximum weight: 122kg
Certification: EN 15194: 2017
The price includes VAT does not include shipping costs
A 12-month warranty is provided on the electric motor, battery and controller.
You must be logged in to post a review.
Reviews
There are no reviews yet.